Description

MIG 311 ALU SYNERGIA welder by MAGNUM is a professional semi-automatic welding machine made in inverter technology, powered from a 400V three-phase network with a maximum welding current of 300A. The device is equipped with a large numeric and graphic LCD screen with an intuitive, easy-to-use control panel. The synergy function used in the device allows for quick setting of welding parameters.

AVAILABLE WORKING MODE:
– MIG – manual settings
– MIG SYNERGY Co2 100%
– MIG SYNERGY Co2 25%
– MIG SYNERGY ALU Argon 100%
– MIG SYNERGY Flux Cored (with self-shielding wire)
– MIG SYNERGY Spool Gun
– MMA – welding with coated electrodes ,
– TIG LIFT

The power source was built on the basis of the latest technology using IGBT transistors , which translates into a reduction of electromagnetic interference, low power losses, increased efficiency and reliability of the power source and lower energy consumption.

The device has smooth adjustment of welding parameters, is equipped with an overload thermal protection system to prevent overheating. The welder is equipped with a professional 4-roll wire feeder with a “euro connector” socket, which allows you to connect various types of welding holders and an output for a gas heater.

TECHNICAL DATA:
– Power supply: AC 400 [V], 50/60 [Hz],
– Required protection: 20 [A] class C
– Max power consumption: 9.12 [kVA]
– Efficiency: 60 [%]
– Running voltage idle: 53 [V]
– MIG / MAG welding current: 50 – 300 [A]
– TIG LIFT welding current: 10 – 300 [A]
– MMA welding current: 10 – 250 [A]
– Maximum wire spool diameter: 300 [ mm]
– Wire diameter: 0.8 / 0.9 / 1.0 / 1.2 [mm]
– Housing protection class: IP21
– Weight: 47 [kg]

THE SET CONTAINS:
– Welding device
– MIG / MAG work cable MB 36 / 3m,
– Cable with a ground clamp,
– User manual.